MARIN RIFT ZONE E1 L 29 TAN BLACK

SPECIFICATIONS

• FRAME

  All New Series 4 Alloy Frame, 140mm MultiTrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor

• FORK

  RockShock Pike Base 29", Motion Control Damper, 140mm Travel, Maxle Stealth Axle, 42mm Offset

• SHOCK

  RockShox Deluxe Select+, Compression and Rebound Adjustment, 210x55, 25xM8 Lower and Upper Mount

• RIMS

  Marin Aluminum Double Wall, 29" Diameter, 29mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible

• HUBS REAR

  Shimano HB-MT400B, 148x12mm, Centerlock Disc, Standard Freehub Body

• HUBS FRONT

  Shimano MT-410B, 110x15mm, Centerlock Disc, 32H

• SPOKES

  14g Black Stainless Steel

• TIRES

  Vee Tire Co. Attack HPL, 29x2.5", Top 40 Tubeless Compatible, Override E-Specific Casing

• DERAILLEUR REAR

  Shimano Deore, Direct Attachment, 11-Speed, SGS

• SHIFT LEVER

  Shimano Deore, 11-Speed

• CRANKSET

  Aluminum, 160mm Length, 38t Chainring

• MOTOR

  Shimano Steps EP6 Drive Unit, 250W, 85Nm

• CHAIN

  KMC X-10E, Silver

• CASSETTE

  SunRace 11-Speed, 11-51T

• BRAKE FRONT

  TRP Slate Evo, 4-Piston Hydraulic Disc, Brake 203mm Rotor

• BRAKES REAR

  TRP Slate Evo, 4-Piston Hydraulic Disc, Brake 203mm Rotor w/ Speed Sensor

• BRAKE LEVERS

  TRP Slate Evo

• HANDLEBAR

  Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back

• STEM

  Marin 3D Forged Alloy, 35mm

• GRIPS

  Marin Grizzly Lock On

• HEADSET

  FSA No 57E, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”

• SEATPOST

  TranzX, YSP23JL, 1x Remote, Size S 150mm Travel, Size M and L 170mm Travel, Size XL 200mm Travel, 30.9mm

• SADDLE

  Marin eMTB Saddle

• PEDALS

  Marin MTB Plastic

• BATTERY

  Shimano BT-EN806, Internal 630Wh

• DISPLAY

  Shimano SC-E600

• SWITCH

   

  Shimano SW-EN600L Left Hand Switch for Assist Mode Change

   

• EXTRAS

  Shimano Battery Charger EC-E6002, Shimano CS-EN800 Chainguide, CushCore Pro Set 29" with CushCore Valve Stems, Marin Tire Sealant 250ml, Squeeze Top with Valve Core Removal Tool Cap

   

  GEOMETRY

  

  	S	M	L	XL
  ASTACK	606.98	614.04	625.1	634.16
  BREACH	445	465	485	515
  CHEADTUBE ANGLE	65°	65°	65°	65°
  DHEADTUBE LENGTH	100	110	120	130
  ESEATTUBE ANGLE	77°	77°	77°	77°
  FSEATTUBE LENGTH	390	400	425	435
  GTOPTUBE EFFECTIVE	585.13	607.22	629.32	661.41
  HBB HEIGHT	348.5	348.5	348.5	348.5
  IBB DROP	32	32	32	32
  JCHAINSTAY	440	440	440	440
  KWHEELBASE	1198.29	1222.52	1246.74	1280.97
  LSTANDOVER HEIGTH	693.65	696.01	709.94	719.93
  MFORK OFFSET	42	42	42	42
  SEATPOST DIAMETER	30.9	30.9	30.9	30.9
  HANDLEBAR WIDTH	780	780	780	780
  STEM LENGTH	35	35	35	35
  CRANK LENGTH	160	160	160	160

  All lengths in millimeters

  SUSPENSION SETUP

  REAR SHOCK SETUP

  Recommended Sag = 30%/19.5mm

  Step 1: Set correct pressure in rear shock.

  Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

  Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

  Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.

  Step 5: Adjust rebound setting to ensure proper control.

  FORK SETUP

  Marin recommends that all bikes front and rear suspension feel balanced

  Step 1: After rear sag is set follow the recommended pressure from the fork manufacturer.

  Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.

  Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.

  ROCKSHOX DELUXE SELECT+

  RIDER WEIGHT AND SHOCK SETUP

  LBS	KG	PSI
  120	54	135
  130	59	150
  140	64	165
  150	68	180
  160	77	210
  180	82	225
  190	86	240
  200	91	255
  210	95	270
  220	100	280
  230	104	289
  240	109	297
  250	113	304
  260	118	310
  270	122	315